Stock Code: ICI401M
Boxed Condition: New
The standard plate range of switches and sockets, also known as bevelled edge, feature a smooth rounded edge around the rim with screws visible to either end of the plate. Standard Plate faceplates protrude approximately 8mm from the wall when fitted (excluding switches and buttons).
A Mirror Chrome finished faceplate is also known by some manufacturers as Polished Chrome or Mirror Steel. It features a smooth mirror finish.
All products are designed to meet latest EU & UK safety legislations.
This Varilight Remote/Touch Dimmer Switch uses the latest Trailing Edge Technology providing many more functions than any other dimmer switch.
Trailing edge dimmers (aka “electronic dimmers”):
Please note: These products are NOT compatible with LED light bulbs. If you are wishing to dim LED's please see our Varilight Eclique LED Dimmer Switch section.
- Electrical current is turned off at the end of the AC input waveform. This is immediately before the zero crossing
- Known for being used for electronic drivers or low voltage transformers (capacitive loads)
- This is not subject to a high inrush of voltage that can lead to a high inrush of current
- There will be no buzzing sound when dimmed
As the name suggests, you can either dim these products by touch of alternatively using a remote conrol.
You can use the Varilight 8 channel remote controller (Product Code: YRC8) if dimming more than 1 remote in a room to avoid confusion of buttons. Alternatively, you can program almost all TV, Sky, video and radio etc infra-red remote controls to work these dimmer switches. To do this, choose a button that is unused (such as -/--) then follow the instructions given in the leaflet provided with the dimmer or on the technical pages on this website.
The Touch/Remote Dimmers are suitable for 1-way circuits, or they can be used in combination with 1 or more of our touch control Dimming Slaves which enables you to dim the same lights from 2 or more switch locations in a 2-way or multi-way circuit. Please note, 2 master switches will not work together, you must use a master and a slave.
The Touch/Remote Dimmer can be used for mains incandescent GLS lamps (standard mains light bulbs), maximum load as specified on dimmer. It can also dim GU10 or similar Hi Spot Mains Halogen lamps (only use quality UK supplied lamps) maximum load as specified on dimmer. By using Touch/Remote dimmers there is a zero risk of damage in case of lamp failure and a dramatically improved lamp life. Whilst the standard range of Varilight Remote/Touch Dimmers are suitable for Dimmable Halogen, CFL and Incandescent light fittings, Cutting edge bulbs like LED's are not supported. If you want to dim LED's, have a look at the new range of Eclique/Eclipse Dimmers.
Minimum pattress box depth for standard plate: 35mm. More space behind the switch module leads to better heat dissipation, particularly useful for switches approaching their maximum wattage
Height: 91mm Width: 91mm
For more detailed information on the whole range of Remote Touch Dimmers, Click here to view our FAQ page